Best Tips for Slate Cutting

!: Best Tips for Slate Cutting

Slate is a natural stone that gives an elegant look to any place. Slate is easy to work upon and so the cutting part is also not that difficult. All it requires is patience and the technique of cutting.

How to Work With Slate Stone?

Slate is a very durable stone but also quiet soft so needs expert handling. Any rough handling will cause the softer slate stone to flake off or break. If you get little dirty in the process of cutting slate then do not be upset. If it is your first slate cutting then it is better to work on hard slate rather than soft one. From the package of slate stone pick the one that is the strongest.

Slate Cutting

Slate cutting is the easiest of all in the category of natural stone. Although pre cut slate is available but if you haven't found what you are looking for then do not lose hope. All you need is planning and care while cutting the slate stone. Get the tile saw from the nearest hardware store. Make sure that you do have the safety glasses, ear plugs and other protective gears before working with any kind of industrial tool. Get the masonry blade either in the form of carbide-tipped or abrasive that can also be used for cutting the slate stone. Also instead of this, wet saw can be rented. If not all these then get the diamond edged blade to cut the slate stone. To cut the small areas and to give the shape you can use the hacksaw. Do not use the manual score and snap tile cutter as these are not made for slate cutting. Make sure that you follow all the instructions before using any of these instruments as any minor fault can lead to disaster. Observe the safety measures as said. Use proper eye mask, chest mask and other such equipments before working with slate stone. While cutting slate small particles of dust ma come and damage your body if you wont take proper precautions. If you have any doubt regarding the cutting or working of the instrument then never hesitate to get the advice from expert. Have lots of patience as slate cutting is quiet a tedious and lengthy process. It may leads to frustration. Make sure to clean the slate tiles properly after cutting as any dust particle on it may lead to the wrong installation.